Tietokoneet ja musiikkiohjelmat ›

Jos tähän sais vaihe vaiheelta suomennosta niin olis upeeta!!!
 

 

 
SUPERIOR INSTRUMENT15
3.2 Windows
Sounds
In the box you will .nd 5 DVDs (they are all double sided with the exception of the .rst which bears a label on the front). On all of these discs you will .nd a folder named Superior. Drag and drop this folder to any of your hard drives at the desired location (for example E:Samples).
You will need to repeat this procedure for every disc, once for each side as the DVDs contain data on both sides of the discs. Choose the “Overwrite, Yes to All” option when asked to complete installation. Windows 98 and ME users should skip DVD9 which is only for systems supporting NTFS volumes.
The SUPERIOR instrument will not work properly until all DVDs have been copied so we recommend .nishing this step before the software installation takes place. Make sure you drag & drop to the same location each time and check that your directory structure matches that of the diagram shown on page 17 after install.
If there are discrepancies in the .le count check the SoundsUpdate folder on the .Installation 1” DVD to help identify what DVD contains the missing .les.
Software
Before you consider installing the software from the supplied DVD, you are advised to check update availability online. If any updates are available you should use those instead. Skip the following section and refer to the documentation enclosed in the downloaded archive.
Double click Drummer-1.x.x.msi located inside the PluginsPCVSTi folder on the DVD-Rom marked “Installation 1” and follow the instructions. We strongly recommend that you perform a custom install to make sure that you install the plugins to the appropriate location for your host program (for example C:Program FilesSteinbergvstplugins , see your host manual for details).
Repeat for all .msi .les located in the same folder including the .le named Rewire-2.x.msi if your host does not support the VST format natively. Please ensure that you install the ReWire resources in the same location as the VSTi (see above). This is achieved by leaving the default path for the installer.
Post install (ReWire only)
Locate the “SuperWireApplet.exe” application on your hard drive (in the folder speci.ed for installation at the previous stage). Launch it and in the following dialogue ensure that the all applicable SUPERIOR instruments are active. If you do not know which instruments are required activate them all. Exit this program.
This only needs to be done once. You may however want to create shortcuts of all executables located in this folder for quick access.