Aihe: Mesassa mikä vikana?
1
Jankku
15.08.2005 13:33:35 (muokattu 15.08.2005 13:34:07)
Saundi on huonontunut aivan järkyttävästi, ei kestä enää edes pieniä volumeja, vähänkin nostaa niin saundi hajoaa Ja kyseessä on Mesan Nomad 55 nuppi... Voisiko olla että putket on menny paskaksi? Mitenköhän ne putket voisi tsekata että onko ne menny vai mikä on?
Hell is where the heart is!
-K-
15.08.2005 14:09:10 (muokattu 15.08.2005 14:10:38)
Saundi on huonontunut aivan järkyttävästi, ei kestä enää edes pieniä volumeja, vähänkin nostaa niin saundi hajoaa Ja kyseessä on Mesan Nomad 55 nuppi... Voisiko olla että putket on menny paskaksi? Mitenköhän ne putket voisi tsekata että onko ne menny vai mikä on?
 
Kuulostaa kyllä putkivialta. En tiedä sitten särkyykö ääni etusessa vai päätteessä, kauanko nykyiset putket ovat olleet kiinni ? ..Mutta kiikuta vierulalle.
 
EDIT: paitsi että koska kyseessä on mesa niin ei tarvitse kuin ostaa uudet mesan putket ja laittaa kiinni. Toki mesan putkien laadusta voidaan olla kahta mieltä. Jos putkimerkkiä vaihdetaan niin biasoida pitää..
Ei suotta elämys.
Jankku
15.08.2005 16:16:34
Putkia ei ole vaihdettu ikinä ja vahvistin on noin 2v vanha... mitähän semmoinen putkien vaihto tulisi maksamaan?
Hell is where the heart is!
PoLFus
15.08.2005 16:31:46
 
 
Vaihto ei maksa mitään, putket varmaan 1-15e kappale.
"I believe in what George Harrison says that you can change the world with love-if you really got it. If you really care, you can do it." - FZ |AKKK#11
monotone
15.08.2005 16:33:38
 
 
Putkia ei ole vaihdettu ikinä ja vahvistin on noin 2v vanha... mitähän semmoinen putkien vaihto tulisi maksamaan?
 
Saksalaiset myy matsattua Mesan 6L6-paria viidellä kympillä. Putkia ei ehkä kannata lähteä sieltä asti tilaamaan, mutta noin referenssiksi.
 
Kannattaa mulkasta sitä Mesan manuaalia, sieltä löytyy tarinaa putkivikojen diagnosoinnista ja muutakin hyödyllistä asiaan liittyvää.
...looking California and feeling Minnesota.
Jankku
17.08.2005 19:21:50 (muokattu 17.08.2005 19:22:44)
Mistähän tietää että onko menny etuaste vai pääteasteen putket? Että tietäis kummat vaihtaa. Kumpi esim. vaikuttaa saundiin radikaalimmin pääteasteen vaiko etuasteen putkien rikkoutuminen?
 
Otin yhden putken (6L6 GC, onkohan nyt sitten pääteaste) irti ja yritin katsoa että onko se paskana, mutta ehän minä siitä mitään ymmärtänyt, joten olisko mitään tuntomerkkejä mistä tietäis putkea katsomalla että onko se sökö vai ihan kondikses?
Hell is where the heart is!
ReBeat
17.08.2005 19:39:46 (muokattu 17.08.2005 19:47:44)
 
 
http://www.roccaforteamps.com/tube_replace.htm
 
(www.brunetti.it)
1) When do I have to replace the power tubes?
During their life the power tubes loose their sound and power characteristics. You can recognize an exhausted tube because it usually has less power and less "impact" especially in the low frequencies.
Another typical characteristic of an exhausted tube is the presence of strange burinings on the external bulb.
 
2) How long does usually a power tube last?
The power tubes life is usually connected to the volume used while playing and to the tube amplifier working time. Another important feature is the output stage configuration: if an amplifier works in Class A, the tubes usually have to stand more "stress" and their lifetime will be shorter. So, according to the different uses, a power tube can last 800 / 1.000 hours approximately.
 
6) How often do I have to replace the preamplifier tubes?
The preamplifier tubes can last for all the amplifier life. The preamplifier tubes are often changed to have different sound characteristics and not because they are exhausted. Infact the preamplifier tubes replacement influences the sound more than the power tubes replacement.
 
7) When is a preamplifier tube microphonic?
A preamplifier tube is microphonic or has become microphonic when it reproduces external vibrations. The amplified vibrations create a distortion which can be often heard by the listener. This problem becomes more evident in a high gain stage (feedback).
 
(Koch Twintone manual)
Preamp and Power tubes wear out and have to be changed from time to time to maintain the amps best performance. Tubes behave like strings, they lose highs, lows and dynamics and after a period of time they have to be changed. Exactly when is hard to say but this is an indication: if you play almost every day change tubes each year, if you play
once or twice a week change tubes every 2-3 years.
Tubes rarely fail. If they are bad, these might be the symptoms:
PREAMP TUBES (ECC83/12AX7A, 7025/12AX7WA):
- Microphonic whistling or squealing on one or both channels.
- No or low amp volume on one or both channels.
- Excessive noise on one or both channels.
POWER TUBES (EL34):
- Loud crackling that is not affected by front panel controls.
- Intermittent or regular blowing fuses.
- Weird amp ‘distorting’.
- Hum.
Ihmiskunta on ylittänyt rajan. Pakokeinoja nopeutuvalta tuhoutumiselta säästymiseksi ei ole.
Jankku
17.08.2005 19:45:30
http://www.roccaforteamps.com/tube_replace.htm
 
ja
 
1) When do I have to replace the power tubes?
 
During their life the power tubes loose their sound and power characteristics. You can recognize an exhausted tube because it usually has less power and less "impact" especially in the low frequencies.
Another typical characteristic of an exhausted tube is the presence of strange burinings on the external bulb.
 
2) How long does usually a power tube last?
 
The power tubes life is usually connected to the volume used while playing and to the tube amplifier working time. Another important feature is the output stage configuration: if an amplifier works in Class A, the tubes usually have to stand more "stress" and their lifetime will be shorter. So, according to the different uses, a power tube can last 800 / 1.000 hours approximately.
 
6) How often do I have to replace the preamplifier tubes?
 
The preamplifier tubes can last for all the amplifier life. The preamplifier tubes are often changed to have different sound characteristics and not because they are exhausted. Infact the preamplifier tubes replacement influences the sound more than the power tubes replacement.
 
7) When is a preamplifier tube microphonic?
 
A preamplifier tube is microphonic or has become microphonic when it reproduces external vibrations. The amplified vibrations create a distortion which can be often heard by the listener. This problem becomes more evident in a high gain stage (feedback).

 
Ihan jees juttu, perkele kun vielä ymmärtäis tuosta jotain =)
Hell is where the heart is!
monotone
17.08.2005 21:48:46
 
 
...looking California and feeling Minnesota.
makoskela
17.08.2005 23:26:07
Ei sattuis olemaan sama yksilö kun sulla on torilla myynnissä?
GAS ei ole sairaus - se on elämäntapa =)
-K-
17.08.2005 23:34:46
Siis ei voi muuta.
 
Menee siihen muidenkin valmistajien, tarvitsee vaan biasoida.
Ei suotta elämys.
Jankku
18.08.2005 15:02:13
Ei sattuis olemaan sama yksilö kun sulla on torilla myynnissä?
 
No eipä ole enää =(
Hell is where the heart is!
Jucciz
18.08.2005 15:54:11
Vaihto ei maksa mitään, putket varmaan 1-15e kappale.
 
Nollat perään. 10-150e/kpl on lähempänä totuutta. Jos NOS-putketkin lasketaan.
‹ edellinen sivu | seuraava sivu ›
1
Lisää uusi kirjoitus aiheeseen (vaatii kirjautumisen)