Elektroniikka ja soitinrakennus ›

iask.ai/?mode=question&q=How+to+apply+factory+reset+to+Zoom+G2.1Nu+%3F
 
How to Apply Factory Reset to Zoom G2.1Nu
 
To perform a factory reset on the Zoom G2.1Nu, follow these detailed steps:
 
Step 1: Prepare the Device
 
Ensure that your Zoom G2.1Nu is powered off before beginning the reset process.
Step 2: Access the Power Switch
 
Locate the POWER switch on your device. This is typically found on the back or side of the unit.
Step 3: Initiate the Reset Process
 
While holding down the STORE/SWAP key, turn the POWER switch ON. This action will trigger the factory reset process.
Step 4: Confirm Reset Message
 
After turning on the device while holding down the STORE/SWAP key, you should see a message on the display indicating that you are in the process of resetting to factory settings. The message will read ZOOM G2Nu/G2.1Nu.
Step 5: Complete the Reset
 
Once you see this message, continue to hold down the STORE/SWAP key until you are prompted with a confirmation or completion message. This indicates that all patches have been restored to their original factory settings.
Step 6: Exit and Test
 
After completing these steps, release the STORE/SWAP key and allow your device to return to play mode. Its advisable to test your device afterward to ensure that it functions correctly and all settings have been reset.
Important Note: Executing an ALL INITIALIZE function will erase all user-saved patches in addition to restoring factory settings, so use this function with caution.