tää tulee nyt in english,
kun en jaksa koko postia tulkkaamaan ..
Eli here we go ;
Power Mac G4 733MHz QuickSilver NO VIDEO
Ok ..
So I've got this rusty QuickSilver G4 733MHz and ..
When I turn on my PPC (blank HDD, several ones tested) I get the normal startup chime, no error beeps, OS 9 install CD is read, HDD shows activity
and fans are on .
But I get no picture on my CRT-monitor (NOKIA 447PRO) .. it just displays cable connected, no signal before going to power save mode .
I've done command - alt - p+r / pram-reset as well as trying to get into open firmware command - alt - o+f .
and even cuda-reset .
the cmos battery is new ..
I've tried unplugging the video card (original nVIDIA GeForce 2 MX) and switching RAM-sticks . No success !!
Should I still try with only 128MBs of RAM, though there are no error beeps ?
The machine behaves mainly okay, but this video problem . The Four Winds must blow ... |
TPS0852
