Kitarat: kitarakamat ›

efunkelist: Re-amppaus lienee näillä peleillä helppoa?
 
Ei niin helppoa kuin voisi olettaa. Toi ei toimi suoraan USB:n kautta, vaan signaali pitää kierrättää interfacen linjalähdön kautta PODin linjatuloon ja sitä rataa. Tulee aika monta AD/DA-muunnosta matkan varrelle. Tässä netistä kopipaskomani amörikkalainen sepustus, kun ei jaksa kirjoittaa itse:
 
Setup:
 
- connect your Audio 6 interface to your DAW, and configure your DAW accordingly
 
- connect your HD500 s/pdif output to your interface s/pdif input. Configure your HD500 so that the s/pdif output sends the dry signal.
 
- connect your HD500 analog outputs to your interface analog inputs. I would use the balanced XLR connections.
 
- do not connect your HD500 via usb to your computer
 

 
Recording:
 
- select the HD500 preset that you would like to use to monitor your sound while recording.
 
- arm a track for recording in your DAW and select your interface's s/pdif input to record
 
- optionally, if you also want to record the wet track arm another track (stereo) for recording and select your interface's analog inputs to record
 
- play and record your take
 

 
Reamping:
 
- connect one of your interface's analog mono outputs to your HD500 Guitar or Aux input. Use a different channel than the one(s) being used for the HD500 analog output connections.
 
- route the dry signal in your DAW to the analog output above for playback
 
- select the HD500 preset that you want to use to reamp the signal, and select the Input for the preset to match your physical input above
 
- arm a new stereo track in your DAW for recording your reamped signal. Select your interface's analog inputs to record, assuming your HD500 -> interface analog connections are still in place
 
- tweak you HD500 preset as desired, and repeat the reamp procedure, until you are satisfied with the reamped tone.