Beetro: Mikä se nyt sieltä vahvarin takaa näkyy, 500mA lasisulake...
Tossapa valmistajan manuskasta.
MAINS FUSE This is a 5x20mm Slow Blow type. 100-120 volt operation requires a 2.5A
fuse. 220-240 volt operation requires a 1.25A fuse. If this fuse blows it could be just a voltage
peak from your power outlet. Put a new one in and see what happens. If it blows again give us
a call. To release the fuse holder you need to push the top and bottom latch with your finger
nails towards each other and pull the insert out. If you cant get it out this way, use a little
screw driver and pull first one, then the other latch, the insert snaps out and you be able to
pull it out.
HT FUSE This is a 3AG Slow Blow screw-cap type and should be .5A on all models. The
HT fuse usually blows if your power amp tubes are bad to protect the circuit from getting damaged.
Ja sitten loppuhun sitä omaa pohdintaa.... Viallista pääteputkea veikattu. "Nuori vihainen tosi cool rockmies" - Big Papa |
